MicronPC CM900 Guía de usuario descargar pdf (Pagina 14)

Plug & Play DDC1/2B Feature

This monitor is equipped with VESA DDC1/2B capabilities according to the

VESA DDC STANDARD. These capabilities allow the monitor to inform the

host system of its identity and, depending on the level of DDC used,

communicate additional information about its display capabilities. The

communication channel is defined in two levels: DDC1 and DDC2B.

The DDC1 is a uni-directional data channel from the display to the host that

continuously transmits EDID information. The DDC2B is a bi-directional data

channel based on the I²C protocol. The host can request EDID information

over the DDC2B channel.

See “Appendix C — Connector Pin Assignment” on page 17 for connector

pin assignments.

APPENDIX A — TROUBLESHOOTING

If the following information does not successfully solve your issue, please

visit the MicronPC Technical Support Site at

http://www.micronpc.com/support/index.html.

If you do not have Internet access, you may also call MicronPC Technical

Support at (800) 877-8856.

Table 3: Troubleshooting Monitor Issues

Issue Solution

The power indicator

LED is not lit.

• Press the monitor power button once to see

if the LED comes on.

• Verify that the power cord is plugged in firmly

and correctly.

The monitor is not

detected by the

system when it is

connected.

• Verify the PC system is Plug & Play

compatible.

• Verify the Video Card is Plug & Play

compatible.

• Check the DB-15 plug on the Video Cable for

bent pins.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

MicronPC CM900 Guía de usuario Pagina 14